Hub

The Hub's patent-pending design turns one port into five. Eliminate the need to build elaborate assemblies of elbows, crosses, and T's just because there is only one port on your machine. The Hub provides two lateral 1" NPT ports, two lateral 3/4" NPT ports, and one central 1/4" NPT port that is designed primarily for a sampling valve. The central port is shielded to protect the sampling valve from accidental impacts and debris. The lateral ports can be used to attach drain valves, quick connects, filter carts, bowls and columns and sight glasses. The Hub is adjustable every 45° so an optimal orientation can be achieved during installation. The Hub is best used in conjunction with Luneta's Column and Bowl. The Hub ships with a sampling valve, stainless steel pilot tube, and four steel plugs to seal any unused ports.

Specifications:

• Application: Oil level and drain ports
• Threads: Varies (see below) 
• Dimensions: See image per each part 
• Recommended Temperature: -40°F to 400°F
• Recommended Pressure: 65 psi. / 4.5 bar 
• Sampling Valve Options: Standard (M16x2) or high flow sampling valve with 12" pilot tube
• Outdoor Compatibility: Yes 
• Chemical Compatibility: Resistant to mineral and synthetic oils that are compatible with fluorocarbon elastomers (Viton)

Materials:

• Body: Epoxy powder coated aluminum
• Connector: Zinc-plated steel
• Plugs: Zinc-plated steel
• Sampling Valve: Zinc-plated steel
• Bolts: Black oxide
• Pilot Tube: Stainless Steel
• O-Rings: Viton

Includes: The hub body, connector, 1" plugs, (2) 3/4" plugs, (2) sampling valves, pilot tube, (4) connector bolts, hex keys for plugs, and connector bolts.

*Hub Accessories listed at bottom of page*