FFD15

General Specs & Benefits:

• Process: Vacuum Dehydration 
• Chamber: Pall Dispersion Rings 
• Chamber Vacuum: 22-27" Hg
• Fluid Temperature: Adjustable heater up to 180°F. Factory set at 145°F and customer adjustable up to 165°F. 
• Seal Material(s): Buna N, Viton, EPDM, or EPR 
• Max Fluid Viscosity: ISO 680 or 4250 SUS
• Intel Pressure Max: 10" Hg Vacuum to 15 psig 
• Outlet Pressure: 65 psig max 
• Continuous Heater Flow: Minimum 2-6 GPM continuous flow through heater to prevent oil cooking 
• Console Remote Alarm: 250 V, 10 AMP dry contact rating 
• Wheel Configuration: Caster wheels, pneumatic tires, fork lift pockets, or floor mount 
• Water Removal Rate: The removal rate of water will vary depending on fluid properties and application parameters
• Operator Interface Panel Features: 
  • One Button Start/Stop 
  • Unattended Operation
  • Automatic PLC based controls safely monitor the system and will shut it down if operating parameters move outside normal limits 
  • Touchscreen Panel displays all conditions, including possible causes and remedies 
  • Troubleshooting and help screens 

Technical Specifications: 

• Flow Rate: 15 GPM
• Vacuum Pump Flow Rate: 13 CFM 
• Heater Capacity: 18 KW @ 15 wsi 
• Motors: 3 HP, 480 VAC, 3 Phase - other voltages are available 
• Plumbing Requirements: 
  • Inlet: 1 1/2" FNPT 
  • Outlet: 1 1/2" FNPT 
• Start Up Bypass: Standard 
• Condenser: Optional 
• Water Monitor: Standard 
• Approx Dry Weight: 1300 LBS 
• Dimensions: 54"L x 31"W x 78"H 

Capabilities: 

• Water: Remove 100% free water plus 90% dissolved water 
• Particulate: ISO Cleanliness Codes 13/11/8; per ISO 4406:1999
• Gases: Remove 100% free gases plus 90% dissolved gases 
• Air: Remove 100% free air plus 90% dissolved air